rotary drilling वाक्य
उदाहरण वाक्य
मोबाइल
- In 1976, the range of machines was expanded to the BG 7 rotary drilling rig.
- Deeprock rotary drilling method is most common.
- In modern rotary drilling, mud is circulated down the drill pipe and back up the well bore to the surface.
- Rotary drilling ( which has since replaced cable tool drilling ) and diamond coring made their appearance in Turner Valley in 1925.
- Fixed cutter bits were the first type of drill bit employed in rotary drilling, and they are mechanically much simpler than rolling cutter bits.
- Unlike rotary drilling, cable tool drilling requires the drilling action to be stopped so that the bore hole can be bailed or emptied of drilled cuttings.
- Modern rotary drilling usually uses a heavy mud as a lubricant and as a means of producing a confining pressure against the formation face in the borehole, preventing blowouts.
- Some rotary drilling machines are designed to install ( by driving or drilling ) a steel casing into the well in conjunction with the drilling of the actual bore hole.
- The development of rotary drilling techniques where the density of the drilling fluid is sufficient to overcome the downhole pressure of a newly penetrated zone meant that gushers became avoidable.
- Rotary drilling machines use a segmented steel drilling string, typically made up of sections of galvanized steel tubing that are threaded together, with a bit or other drilling device at the bottom end.
- The number of active rotary drilling rigs in the United States has risen only 20 percent in the last year, to 146, according to Baker Hughes, a Houston oil services concern, and is still far below its highs for the decade.
- This design represented a significant improvement in drilling performance over the so-called fish tail scraper type bits commonly used in rotary drilling at the time, and over the next two decades, rotary drilling with rolling cutter bits largely replaced all other drilling methods in the oilfield.
- This design represented a significant improvement in drilling performance over the so-called fish tail scraper type bits commonly used in rotary drilling at the time, and over the next two decades, rotary drilling with rolling cutter bits largely replaced all other drilling methods in the oilfield.
- Prior experience with rotary drilling had established several principles for the configuration of drilling equipment down hole ( " Bottom Hole Assembly " or " BHA " ) that would be prone to " drilling crooked hole " ( i . e ., initial accidental deviations from the vertical would be increased ).
rotary drilling sentences in Hindi. What are the example sentences for rotary drilling? rotary drilling English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.